- LOJ LSx to Xterra / Frontier / Titan / Armada Motor Mounts (CNC Cut and Bent Motor Mount Brackets,, Brackets are powdercoated for durability and include hardware)
- LOJ Conversions Transmission Mount Bracket. Bolts to the stock crossmember using the supplied hardware and an Energy Suspension Polyurethane Bushing to accommodate the Rear Mount Engine Position.
-
LOJ Conversions Road-Race Oil Pan with 11 quarts of capacity and advanced multi-stage trap door baffling. Includes Pan, Pickup Tube, Gasket, Dipstick, Hardware, & -10AN welded fittings for Oil Filter Relocation and Turbo Drains.
- LOJ VQ40DE Transmission to LSx Adapter Kit Including:
- 6061-T6 Billet Aluminum Transmission Adapter Plate fabricated from USA Sourced Metallurgically Certified Heat Treated Aluminum. Hard-Anodized Black for long lasting good looks and durability.
- LOJ Billet Steel Flywheel. This flywheel will accept any stock LS Clutch Pressure Plate designed for the C5 Corvette, or you can add one as an option to your adapter kit.
- Custom LSX Clutch Setup (11.5" Diameter with Nissan Input Shaft Splines). These are available in the following styles:
- Zinc-Plated Grade 8.8 or Higher Hardware
- Pilot Bushing
- Release Bearing
- 4" Diameter Aluminum One Piece Driveshaft. A Shortened Driveshaft is included due to the transmission being pushed back and eliminating the problematic carrier bearings. These things are massive!
- Frontier / Xterra / Navara / Titan / Armada LSx Swap Oil Filter Relocation Kit - 4WD Trucks
- LOJ Conversions LSx to 350Z Accessory drive kit. This allows you to run a stock 350Z Power Steering Pump (matches to your truck rack's pressure/flow and works with your stock PS hose), VQ40 or 350Z Alternator (works with your stock wiring), and a 350Z AC Compressor (optional, can work with your stock AC lines with minor modifications) to bolt directly to the LSx engine while retaining your factory plumbing and wiring.
- LOJ Conversions Frontier / Xterra / Navara / Titan / Armada LSx Swap Fuel System. This includes a completely new fuel sending unit assembly with high flow fuel pump and upgraded fuel pressure regulator to feed your LSx engine up to 550WHP on 93 Octane.
Compatible Vehicles:
- 2005-2018 Nissan Xterra 2WD/4WD VQ40DE Manual Transmission (N50)
- 2004-2018 Nissan Frontier 2WD/4WD VQ40DE Manual Transmission (D40)
- 2004-2018 Nissan Navara 2WD/4WD VQ40DE Manual Transmission (D40)
- 2008-2012 Suzuki Equator 2WD/4WD VQ40DE Manual Transmission (D40)
What LS Engines Do Your Kits Work With?
Any Generation 3 or Generation 4 Small Block Chevy Engine, this includes the following engine displacements and codes:
- 4.8L - LR4 (Gen 3) LY2, L20 (Gen 4) Silverado, Express Van, Escalade, Tahoe, Trailblazer, etc.
- 5.3L - LM7, L59, LM4, L33 (Gen 3) LH6, LY5, LMG, LC9, LH8 (Gen 4) Silverado, Express Van, Escalade, Tahoe, Trailblazer, etc.††
- 5.7L - LS1, LS6 (Gen 3) C5 Corvette, F-Body Camaro/Trans Am, GTO, etc.
- 6.0L - LQ4, LQ9 (Gen 3) LS2, L76, L98, L77, LY6, LFA, LZ1 (Gen 4) Silverado, Escalade, C6 Corvette, GTO, G8, etc.††
- 6.2L - L92, LS3, L99, LS9‡‡, LSA‡‡ (Gen 4) Camaro, Corvette, Escalade, CTS-V, G8 GXP, etc.
- 7.0L - LS7‡‡, LSX‡‡ (Gen 4) Corvette Z06, Chevy Performance
For more information, click here